9 Legs Plastic Pallets for Space-Saving Export and Return Logistics
We manufacture lightweight 9 legs plastic pallets for export shipping, retail distribution, warehouse transfer and empty-pallet returns. Nine independent feet replace continuous bottom runners, allowing selected empty pallets to nest at ratios up to 4:1 and reduce empty volume by up to 75%.
- ✓Open-grid, solid, slotted and application-specific decks
- ✓Footprints from 800 × 600 to 1970 × 1010 mm
- ✓Published loads up to 1,500 kg dynamic / 6,000 kg static
- ✓0 wood heat treatment and 0 fumigation under ISPM 15
9 independent feet · 4-way entry
What Is a 9 Legs Plastic Pallet?
A nine-leg plastic pallet has 9 independent feet, normally arranged in a 3 × 3 pattern. Tapered feet on nestable designs enter the pallet below, compressing empty stacks for storage and return transport.
01Nine Independent Support Feet
The base uses 9 support points and 0 continuous runners. This reduces bottom material, tare weight and empty-pallet volume for floor handling and shipping.
02Sizes, Decks and Materials
Our range covers 800 × 600 to 1970 × 1010 mm, or approximately 0.48–1.99 m² of deck area. Select open grid, solid flat, ribbed, slotted or molded positioning surfaces in HDPE or PP.
03Loads and Four-Way Handling
Published capacities span 500–1,500 kg dynamic and 800–6,000 kg static. Four-way models give you 4 approach directions; pallet-jack-compatible models also provide clear wheel paths.
04Floor and Rack Use
Unreinforced nine-leg pallets are for transport and floor-supported storage and cannot be used on unsupported beam racks. Steel-reinforced rack configurations can be used on warehouse racks.

Find a 9-Leg Plastic Pallet for Your Route
Filter by deck and application. Every product remains in the server-rendered page, while the controls help you review nine cards at a time.
1200 × 800 mm Lightweight Grid Deck 9-Leg Plastic Pallet
A 5.8 kg one-piece export pallet with an open grid deck and nine-foot base for compact floor storage and shipping.
- Dimensions
- 1200 × 800 × 135 mm
- Body weight
- 5.8 kg
- Material
- HDPE / PP
Best for: Lightweight export, cartons and floor-supported transport.
1200 × 800 mm Open-Grid One-Piece 9-Leg Plastic Pallet
An open-deck Euro-footprint pallet with optional 4-tube reinforcement and four-way forklift and pallet-jack entry.
- Dimensions
- 1200 × 800 × 145 mm
- Body weight
- 11.05 kg
- Steel option
- 4 tubes / 3 kg
Best for: Reusable floor logistics, airflow and drainage.
1200 × 800 mm Solid Flat-Top One-Piece 9-Leg Plastic Pallet
A continuous flat deck supports cartons, bags and small packages while the nine-foot base keeps four-way handling access.
- Dimensions
- 1200 × 800 × 150 mm
- Body weight
- 10.9 kg
- Steel option
- 4 tubes / 3 kg
Best for: Paper, bags, boxed goods and washable floor handling.
1200 × 800 mm Grid Deck 9-Leg Plastic Pallet
A 13.8 kg industrial Euro-size pallet for repeated floor handling, block stacking and ventilated unit loads.
- Dimensions
- 1200 × 800 × 160 mm
- Body weight
- 13.8 kg
- Material
- HDPE / PP
Best for: Industrial distribution and reusable floor storage.
1200 × 1000 mm Green 9-Leg Grid-Top Plastic Pallet
A color-coded industrial pallet whose 3-bar reinforced build raises dynamic and static capacity by 50%.
- Dimensions
- 1200 × 1000 × 140 mm
- Body weight
- 12.4 kg
- Reinforcement
- 3 bars / 3 kg
Best for: Color-coded warehouse zones and reinforced floor loads.
1200 × 1000 mm Single-Sided Lightweight 9-Leg Pallet
A 7.8 kg one-piece pallet for one-way shipping, floor handling and routes where low tare weight matters.
- Dimensions
- 1200 × 1000 × 140 mm
- Body weight
- 7.8 kg
- Container reference
- 400 / 1,000 pcs
Best for: One-way export and weight-sensitive distribution.
9-Leg Flat-Top Plastic Pallet Series for Printing
A flat-deck printing and paper-handling series with footprints from 800 × 650 to 1250 × 900 mm.
- Size range
- 800 × 650–1250 × 900 mm
- Published weight range
- 6.5–10 kg
- Entry
- 4-way forklift / pallet jack
Best for: Printing, paper handling and internal plant logistics.
950 × 650 mm 9-Leg Printing Nestable Plastic Pallet
A compact flat-top pallet that nests when empty for printing plants with limited return and storage space.
- Dimensions
- 950 × 650 × 140 mm
- Construction
- One-piece injection
- Entry
- 4-way forklift / pallet jack
Best for: Printing sheets, paper products and compact empty returns.
960 × 720 mm 9-Leg Plastic Pallet for Printing
A ribbed, slatted printing pallet that combines open surface support with a 1,000 kg moving capacity.
- Dimensions
- 960 × 720 × 150 mm
- Material
- PP / HDPE
- Deck
- Ribbed / slatted
Best for: Printing presses, paper transfer and plant circulation.
1050 × 760 mm 9-Leg Slotted-Top Printing Pallet
A tall slotted-deck printing pallet for stable internal transfer with four-way forklift and pallet-jack access.
- Dimensions
- 1050 × 760 × 175 mm
- Material
- PP / HDPE
- Deck
- Slotted top
Best for: Printing, paper converting and industrial work-in-process.
1000 × 800 mm Ultra-Light Single-Sided Plastic Floor Pallet
A 7.1 kg open-grid floor pallet that supports 800 kg in motion and 3,000 kg on a flat floor.
- Dimensions
- 1000 × 800 × 146 mm
- Body weight
- 7.1 kg
- Container reference
- 600 / 1,450 pcs
Best for: Export, floor storage and high-density container loading.
1100 × 1100 mm Rib-Reinforced Nestable Compression-Molded Pallet
A 17 kg square nestable pallet with a rib-reinforced flat deck and 1,500 kg dynamic capacity.
- Dimensions
- 1100 × 1100 × 150 mm
- Body weight
- 17 kg
- Material
- PE
Best for: Square loads, returnable floor logistics and block stacking.
1100 × 1100 mm Lightweight Nestable 9-Leg Logistics Pallet
A 9.3 kg square flat-deck pallet for lightweight logistics, compact empty storage and four-way handling.
- Dimensions
- 1100 × 1100 × 135 mm
- Body weight
- 9.3 kg
- Container reference
- 410 / 1,050 pcs
Best for: Square cartons, export loads and empty returns.
1150 × 750 mm Lightweight Flat-Surface Nestable Pallet
A narrow-format 6.8 kg pallet with a continuous flat surface and nestable nine-foot underside.
- Dimensions
- 1150 × 750 × 150 mm
- Body weight
- 6.8 kg
- Construction
- One-piece injection
Best for: Narrow loads, floor distribution and compact empty storage.
1100 × 900 mm Single-Sided Ultra-Light Plastic Pallet
A 9 kg flat-deck pallet for reusable floor handling and export routes with non-standard load footprints.
- Dimensions
- 1100 × 900 × 140 mm
- Body weight
- 9 kg
- Container reference
- 470 / 1,150 pcs
Best for: Non-standard cartons, floor circulation and export shipping.
1970 × 1010 mm 9-Leg Solar Panel Pallet
A long-format blow-molded pallet with a grooved surface for solar-panel and PV-module logistics.
- Dimensions
- 1970 × 1010 × 150 mm
- Body weight
- 20 kg
- Module reference
- 25–30 panels
Best for: Solar panels, PV modules and long-format industrial goods.
1100 × 1100 mm 9-Leg Bulk Bag Pallet
A 6 kg square grid pallet designed for bulk bags, FIBC loads and lightweight industrial transfer.
- Dimensions
- 1100 × 1100 × 100 mm
- Body weight
- 6 kg
- Material
- HDPE
Best for: FIBC, bulk bags and low-profile floor handling.
1080 × 810 mm 9-Leg 5-Gallon Water Bottle Pallet
A molded delivery pallet with 12 positioning wells that separate and stabilize 5-gallon water bottles.
- Dimensions
- 1080 × 810 × 170 mm
- Body weight
- 13.5 kg
- Bottle positions
- 12 wells
Best for: 5-gallon bottle plants, delivery routes and empty-bottle returns.
How 9-Leg Plastic Pallets Save You Space and Weight
These numbers use published product and same-family comparison data, so you can see the trade-off between nesting, tare weight and floor load capacity.
Less Empty-Pallet Volume
A nesting ratio up to 4:1 places about four nested pallets in the vertical space of one non-nestable pallet.
Fewer Empty-Return Movements
Same-family published examples compare 1,848 vs 495, 1,620 vs 540 and 858 vs 308 empty pallets per vehicle.
Lower Tare Than Runner Bases
Same-family comparisons include 5 vs 7.5 kg, 10 vs 13.5 kg and 12.5 vs 16 kg for nine-foot and three-runner versions.
Dynamic Load-to-Weight Example
A published 5 kg pallet carries 1,000 kg dynamically and 1,800 kg statically—200× and 360× its own weight.
Lighter Than a Euro Wood Pallet
A 5 kg plastic export pallet is about 80% lighter than the approximately 25 kg EPAL 1200 × 800 mm wood reference.
Twice the Approach Directions
Four-way entry gives your forklift 4 approach directions instead of the 2 directions available on a two-way pallet.
No Wood, Nails or Wood Treatment
Plastic construction uses 0 wood boards, 0 exposed nails and 0 ISPM 15 wood-treatment steps for export.
Recycled-Content Routes
Published black-pallet routes reach 70% PCR/PIR and colored routes 30%; suitable configurations are 100% recyclable.
Nine-Leg Pallets for Different Unit Loads
See how grid, solid, printing, bulk-bag, solar and bottle-positioning surfaces change what the pallet supports.






Where You Can Use 9 Legs Plastic Pallets
Start with your unit load and empty-return route, then choose the deck, footprint and material that fit the job.
One-Way Export Shipping
Use 0 fumigation treatments, 0 wood heat treatments and 0 wooden IPPC marks for cartons, bags and packaged industrial goods.
High-Density Empty Returns
A published 1200 × 1000 mm nine-foot example loads 1,276 units per 40'HC versus 400 for its three-runner version—3.19× the density.
Air Freight and Weight-Sensitive Loads
A 9.5 kg nine-foot pallet is 25.5 kg lighter than an approximately 35 kg wood reference. Across 1,000 pallets, that removes 25.5 tonnes of tare.
Distribution Centers and Store Delivery
Four-way entry provides 4 approach directions, helping you work from the long or short side during receiving, picking and loading.
Floor Storage and Loaded Stacking
Our range reaches 1,500 kg dynamic and 6,000 kg static for floor-supported handling. Unreinforced nine-leg pallets cannot go on unsupported racks.
Printing, FIBC, Solar and Water Delivery
Choose printing sizes from 800 × 650 to 1250 × 900 mm, a 6 kg FIBC pallet, a 1.99 m² solar pallet or a design with 12 bottle wells.
See Plastic Pallet Production and Handling
Watch the pallet structure, fork-entry layout and material-handling sequence. Focus on the deck, bottom support and the way the load is carried while moving.
Configure the Pallet Around Your Cargo
We can match an existing mold first, then configure the deck, resin, color, identification and load-retention details.
Size & Deck
- 800 × 600 to 1970 × 1010 mm
- Open grid, flat, ribbed or slotted
- Molded wells and product locators
Material & Color
- HDPE or PP
- Industrial recycled or virgin resin
- Standard and custom colors
Handling & Retention
- Forklift or pallet-jack wheel paths
- Rims, anti-slip strips and blocks
- Film slots and load locators
Identification & Rack Use
- Molded logos, stamps and numbering
- Barcode, QR and RFID positions
- Steel-reinforced rack configurations
9 Leg vs 3 Runner, Full Perimeter and Wood Pallets
Choose a nine-leg base for low tare and compact empty returns. Choose continuous runners when you need continuous conveyor or rack support.
| Structure | Bottom geometry | Empty return | Rack use | Best fit |
|---|---|---|---|---|
| 9-Leg / Nestable | 9 independent feet | Up to 4:1 nesting | Steel-reinforced rack versions only | Export, retail, floor storage and empty returns |
| 3-Runner / 3-Skid | 3 continuous longitudinal runners | Normally not deeply nestable | Steel-reinforced versions can rack | Conveyors, loaded stacking and rack storage |
| Full Perimeter / 6-Runner | Connected outer frame and internal runners | Normally not nestable | Steel-reinforced versions can rack | Heavy loads and broad bottom contact |
| Double-Sided | Two usable load faces | Not nestable | Heavy-duty configurations available | Dense industrial loads and reversible use |
| EPAL Wood Reference | 11 boards, 9 blocks and 78 nails | Not nestable | Existing wood-pallet systems | Exchange pools and established wood routes |
Repeatable Supply for Standard and Custom 9-Leg Pallets
We bring more than 20 years of plastic load-carrier manufacturing experience to your project. We first match your footprint, deck, leg position, handling equipment and load route to an existing mold, then configure resin, color, logo and identification.
9 Legs Plastic Pallet FAQs
Direct answers about structure, load, nesting, rack use and export handling.
What is a 9 leg plastic pallet?
It has 9 independent support feet, normally arranged in a 3 × 3 pattern. Tapered feet on nestable designs enter the pallet below, reducing empty storage and return volume.
How much weight can a 9 leg plastic pallet hold?
Our published range covers approximately 500–1,500 kg dynamic and 800–6,000 kg static. Dynamic capacity applies during handling; static capacity applies to an evenly distributed load on a flat floor.
Are 9 leg plastic pallets rackable?
Steel-reinforced nine-leg rack pallets can be used on warehouse racks. Unreinforced nine-leg pallets cannot be placed on unsupported beam racks and are used for transport and floor storage.
How much space can nestable nine-leg pallets save?
Nesting ratios can reach 4:1, reducing empty volume by up to 75%. Same-family data show approximately 2.8–3.7× more empty nine-foot pallets per vehicle than runner-base versions.
What is the difference between 9 leg, 3 runner and full perimeter pallets?
A nine-leg pallet uses 9 separate feet. A three-runner pallet uses 3 continuous longitudinal runners. A full-perimeter pallet connects the outer frame and internal runners. Nine-leg designs prioritize empty-return density; runner bases prioritize continuous support.
Do 9 leg plastic pallets need fumigation for export?
No. Plastic pallets require 0 fumigation, 0 wood heat treatment and 0 wooden IPPC treatment marks under ISPM 15, making them suitable for international sea and air shipments.